If you’re in the market for a new wood planer, there are many different options to choose from. But, it can be difficult to decide which one is right for you. In this article, we’ll cover the features of two of the most popular wood planers on the market, the DW735X and the DW735. You’ll also learn about the differences between the two and find out what you can expect from each.
DW735X vs DW735
If you are in the market for a new planer, you should compare the Dewalt DW735X with the Dewalt DW735. These two models are very similar in most ways. However, the DW735X model is slightly more expensive and a bit heavier. In addition, the DW735X has a few additional features.
Among these features, the DW735X has an additional blade. It also comes with an extra set of knives for the cutterhead. The DW735X has an automatic carriage lock, which allows it to cut faster. This feature is very helpful in reducing snipe on boards. Snipe occurs when a board’s height does not match the cutting blade’s height.
Another feature on the DW735X is a fan-assisted ejection vacuum, which keeps dust and debris from entering the machine. Because the DW735X’s motor is powerful, this system has the ability to cut a wide range of material.
DW735 blades are reversible
The Dewalt DW735 is a great tool for anyone who wants to plan out large workpieces. It has a sturdy construction, a powerful 15 Amp motor, and a reversible two-sided blade for a longer cutting life. You can also adjust the roller setup for fine tuning your cuts to keep the blades parallel.
The Dewalt DW735 has one other impressive feat, a two-speed feed system. This will allow you to cut lumber at a higher rate. Additionally, the reversible two-sided blade will let you switch between straight edge and spiral cutting.
Another tidbit is that the planer’s motor can handle a peak speed of 20,000 RPM. In addition, it has a reversible receptacle to store the three-blade set that comes with the planer.
Byrd shelix cutterheads for DeWALT planers
If you are looking for a good upgrade for your DeWalt planer, you may want to look into a Byrd Shelix Cutterhead. This blade combines the best parts of a shear and helix. They are quiet, run a LOT smoother, and last a LOT longer. You’ll also be able to see a measurable difference in your finish, so you can feel confident about your woodworking project.
The Shelix head has a few cool features that aren’t found in other models. First, there is a small hole in the machine housing for the head to fit through. While this does mean that the head can’t be installed while the knives are still mounted, it does make changing the knives a cinch.
Dust collection
If you are looking for the most efficient way to clean the air in your shop, you are probably looking for a dust collection system. Luckily, it is not too difficult to do if you have the know how. You should be able to find a complete kit at your local home improvement store or lumberyard. The trick is to choose the correct size container for your workspace.
Aside from the obvious question of how much space you have to work with, you’ll also want to take into account your budget. It’s best to avoid overspending on dust collection systems that don’t deliver the goods. There are a couple of companies out there that make inexpensive kits and can be easily assembled on a budget.
Cord length
The Dewalt wood planer is a versatile and highly customizable tool. It features a dual speed gearbox that allows for easy adjustments. Additionally, the unit comes with a four-inch dust port, which can be used to remove the dust from the blade and work area. There is also a kickstand built into the back end of the machine. This feature will keep the planer from slipping on the material you are working on.
In addition, the DW735 has a depth adjustment crank that allows for quick height changes. It also features an automatic carriage lock mechanism, which will prevent any accidental on or off switching. Another feature is the V-notch, which makes it easy to make accurate chamfer cuts in the edges of the material.
