There are a lot of options out there when it comes to wood planers for sale. For instance, you can choose between a Benchtop planer, Industrial planer, or a Newman Whitney planer S382 HD. Each has its own advantages and disadvantages.
Benchtop thickness planer
If you’re looking for a benchtop thickness planer for sale, there are many options to choose from. The choice can be overwhelming. To help you make the best decision, we’ve put together this helpful guide. We’ll cover the key features to look for, and how to find the right planer.
Benchtop thickness planers are similar to large industrial planers, except that they are portable and have smaller capacities. This means you can plane boards that are up to 13 inches wide. In addition to being portable, they can be used on softer woods, and don’t require much juice to cut off a layer of soft wood.
For the best results, your planer should have a quality motor. It should also be able to handle any type of wood you’d like to plane.
One of the most important features to consider is the cutter head. A planer with a helical cutterhead will produce a smoother surface than a straight knife. However, this type of cutterhead has a higher initial cost.
Another feature you may want to check is the dust port. Dust ports are attached to a shop vacuum and help keep your planer running clean. They can be attached to either side of the machine, so you can pick up any dust that accumulates.
Industrial planer
If you want to plan lumber to a specified thickness, you’ll need a good industrial wood planer. These machines are designed for use in large manufacturing facilities, as well as in a home workshop. They can cut a wide range of materials, from rough lumber to finished board size. Depending on the type of job you are performing, you might also need a surface planer, which smooths out rough lumber.
Most industrial planers come with a three or five horsepower motor. This allows for a faster speed, greater capacity for cuts, and the ability to remove more material in one pass. It also reduces the risk of damage to the planer.
The most important part of the wood planer is its cutterhead. It has to be sharp to produce excellent results.
Another major component of the planer is the table. This is the part that is attached to the machine, and moves up and down on four steel columns. A chrome-plated hand wheel at the top of the table lets you control the depth of cut.
Industrial wood planers are usually accompanied by a user guide, which provides instruction on maintenance and cleaning. It is important to read the instructions before using the machine, as failure to do so could cause serious injury.
Newman Whitney planer S382 HD
A Newman Whitney planer is an electrically driven machine. It is designed to take random width rough sawn lumber and cut it to a specified thickness. This is done by taking the material off the top and bottom surfaces at the same time. The system is a semi-automatic unit, which can be safely operated. However, it has built-in hazards, so it is important to follow some basic safety rules.
First, you need to set up the machine correctly. If you don’t, you could shock the system or cause it to perform less than desired. For example, you need to adjust the feed rolls so they are properly positioned. In addition, you need to make sure that the incline table is clean.
Next, you need to know the best way to adjust the planer. It is important to use the correct chipbreaker tension. You can do this by adjusting two 3/4″ nuts.
Also, you need to know how to lock out the planer. After you have secured the power, you need to disconnect the planer from the main power source.
There are several options for locking out the planer, including a lock, levers and a lever that can be locked in place. These can be purchased from various manufacturers, and you can find them online.
